Cleveland Iron Works combustion exhaust blower for PS60 and PS130 pellet stoves. Genuine OEM replacement part, fits perfectly and install easily. Cleveland Iron Works Models. Unplug the power from the unit. Remove the side panel closest to the combustion blower. Disconnect the 3 wires running to the motor. Pay special attention to the location of the yellow and green ground wire. Remove the 4 wing nuts holding the mounting plate in place. Gently pull out the motor & scrape away any gasket material that may be left sticking to the housing. Install the new motor. Make sure it seats tightly against the housing. Be careful not to damage the fan blade when setting the blower in place. Reinstall the 4 wingnuts. Reconnect the 3 wires to the blower. Make sure the yellow and green ground wire is connected to the proper spot on the motor. Reinstall the side panel and plug in the unit. Benefits of Adding a Fireplace Blower. Improves fireplace efficiency by as much as 80%. Helps reduce costly energy bills. Heats large rooms effectively. Installs quickly and easily. L x W x H. Blower, Motor & Bearing. Included Velcro, tape and noise reduction padding. Noise Reduction Padding & Velcro. Listing and template services provided by inkFrog.