Replacement Srv7000659 Convection Blower Distribution Fan For Pelpro Pp60 Pp60b
Adviace Replacement SRV7000-659 Convection Blower Distribution Fan for Pelpro PP60 PP60-B PP60B & Pleasant Hearth PH50CABPS PH35PS PH50PS PH50 PH35 Pellet Stoves. Perfect Compatible Models?? Replacement SRV7000-659 Convection Blower for Pelpro PP60, PP60-B, PP60B, PP60-RF Pellet Stoves. Replacement Distribution Fan SRV7000-659 for Pleasant Hearth PH50CABPS, PH35PS, PH50PS, PH50CABPS-B, PH35, PH50, PH50CAB, PHCAB50PS, 50CABPS Pellet Stoves. Replacement For Part Number: SRV7000-659, SRV7000-659M, PH-659. What You Will Get? Aftermarket SRV7000-659 convection blower distribution room air fan assembly. Why Do You Need To Replace A New Blower? The original pelpro pp60 convection blower was wearing out after years and made a LOUD SQUEAK every time it was used, stove was not burning great and you old fan was causing the stove to overheat. 100% Ball Bearing Blower? The bearing of this convection blower distribution fan srv7000-659 is 100% sealed ball bearing blowers, which is last longer and outperform cheaper sleeve bearing blowers. Sealed ball bearings require no additional maintenance, are less prone to the effects of heat, and will operate more quietly over their full lifetime. Technical Specifications? Volts 115, Cycles 60Hz, Amps 0.9, RPM 2400. Two Wire Hook Up with 1/4 Male Spade Ends. Overall length is approx 17-1/2 Length. Length without motor is approx 14-1/2. This is a 115V AC sealed bearing motor with electrical terminals on the motor for installation, no lubrication is required. Simple installation, make sure your stove is unplugged from the wall while installing. Replacement Convection Blower for PelPro & Pleasant Hearth pellet stoves. Replacement for part number: SRV7000-659, SRV7000-659M. Fits the following models. Recommended to clean the blower fins annually to remove any dust or debris. Please wait for the result of cancellation. The order will be processed and completed by automatic warehouse system within 5 minutes. Sending direct message to cancel the order is not allowed for every case. For the return case.